Serving the Amarillo area  ·  (806) 414-3919  ·  Open Mon-Sun 7am-7pm
📞 (806) 414-3919 Free Quote

Metal Roofing in Bishop Hills, TX (79124) · Local Professionals

Amarillo Metal Roofing · Fast response in Bishop Hills and the Amarillo area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Bishop Hills is a small, quiet community just north of Amarillo, where large lots and open plains mean the wind never stops. Most homes here sit on generous acreage with long rooflines, and many were built between the 1970s and 1990s, though you'll also find newer custom builds and a few older farmhouses. The flat, treeless Llano Estacado stretches in every direction, and the nearest landmark is the Canadian River breaks to the northeast.

Homeowners in Bishop Hills (79124) call Amarillo Metal Roofing because we understand how wind and hail punish roofs out here. We've been serving the Amarillo area since 2009, and we've seen firsthand how steady gusts lift loose panels and how spring supercells leave their mark. Whether your home is off Bishop Hills Drive or a quiet county road, we know the local conditions and build roofs that hold up.

Metal Roofing in Bishop Hills (79124)

Bishop Hills sits on flat, open ground with little natural windbreak, so roofs take a constant beating from prevailing winds and occasional extreme gusts. The large lots often mean long, low-pitched roofs on ranch-style homes, and many properties have detached shops or barns that need the same wind-rated protection. Access can be tricky on unpaved roads after heavy rain, and we plan deliveries and equipment accordingly. Because the area is outside Amarillo city limits, permitting goes through Potter County, and we verify requirements with the county before any work starts. We also watch for ice damming at eaves on the few homes with steeper pitches, and we recommend snow guards where ice can slide.

Our team has been installing, repairing, and replacing metal roofs in Bishop Hills and across the Amarillo area since 2009. We're a Metal Roofing Alliance member and fully insured, so you know the crew on your roof is covered.

Our services in Bishop Hills

How a Job Works in Bishop Hills

Step 1: You call us at (806) 414-3919 or request a free estimate online. We schedule an on-site assessment at your Bishop Hills property, usually within a few days. We inspect your current roof, check for wind damage, loose fasteners, or leaks, and talk through options like standing seam, corrugated panels, or a retrofit over shingles. You get a written estimate with clear pricing.

Step 2: Once you approve, we pull any required permits through Potter County and schedule the work. On large lots with long driveways, we coordinate material delivery to avoid blocking access. Our crew protects landscaping and works efficiently, whether it's a simple repair or a full replacement. We keep you updated on progress and any weather delays.

Step 3: After the job, we clean up thoroughly, haul away old materials, and walk the property with you to make sure you're satisfied. We don't leave until your yard and roof are clean and the work is done right.

Pricing for metal roofing in Bishop Hills depends on the size and complexity of your roof, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, corrugated panels at $5.50, and stone-coated steel at $9. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. A full replacement typically runs $9 per square foot and up. Factors like roof pitch, number of penetrations, and urgency can affect the final quote. Call us at (806) 414-3919 for a free, no-obligation estimate tailored to your Bishop Hills home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Bishop Hills and nearby areas.

My Bishop Hills home has a long, low-pitched roof and we get strong winds. What metal roof system works best?
For low-pitched roofs on open lots like yours, we often recommend standing seam metal roofing because the concealed fasteners and raised seams resist wind uplift better than exposed-fastener panels. We also assess your roof deck and fastening pattern to make sure it meets wind requirements. Corrugated panels can work too, but we use heavier gauges and wind-rated screws. We'll evaluate your specific roof and recommend the best option during a free inspection.
A storm just peeled back some panels on my barn in Bishop Hills. How fast can you respond?
We prioritize storm and wind damage calls in Bishop Hills and the surrounding area. Call us at (806) 414-3919 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on weather. We can tarp or secure damaged areas to prevent further leaks, then provide a repair estimate. We document everything for insurance claims if needed.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Bishop Hills?
For a 2,000-square-foot home, a basic corrugated panel roof might start around $11,000 to $14,000, while standing seam could run $20,000 or more, depending on pitch, removal of old shingles, and trim work. These are ballpark figures. We provide a detailed written estimate after inspecting your roof. Call (806) 414-3919 to schedule.
Do I need a permit for a metal roof in Bishop Hills, and who issues it?
Bishop Hills is in Potter County, and roofing permits are typically required for replacements or re-roofs. Requirements vary, so we verify with the county before starting. You can also check with the City of Bishop Hills website for general local information. We handle the permit process for you as part of the job.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line issues can be sensitive. We always respect setbacks and easements when designing your roof. If there's a concern, we can review your survey and adjust the design before installation. For HOA rules, we can coordinate with your association to ensure color and profile approval. We recommend talking with your neighbor early and keeping documentation.
Are you insured for roofing work at my Bishop Hills property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide certificates of insurance upon request. This protects you and our crew in case of an accident on your property.
What maintenance does a metal roof need in Bishop Hills to handle the wind and hail?
We recommend an annual inspection, especially after spring storm season. Check for loose or missing fasteners, lifted panels, and debris buildup. In winter, keep gutters clear and consider snow guards if you have areas where ice slides. We offer maintenance plans and free estimates for any needed repairs. Call (806) 414-3919 to schedule.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Amarillo

All your work handled by qualified professionals in Amarillo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Amarillo

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Amarillo · Response within 24h · No commitment · ☎ (806) 414-3919

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Amarillo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm